EK Blog

SLIPro Manager app for all major simulation (iRacing, GTR2, Steam version of Simbin RaceON, STCC, GTREvo and LFS, …) manage your SLI-PRO and SLI-M USB devices from Leo Bodnar.

SLI-PRO USB Device User manual.

SLI-PRO Configuration software for encoders.

SLIPro Manager app
Latest pkg SLIProMgr_094d17f.rar (updated 2010-08-15- latest firmware required):


* if app won’t start see here

**Release note and beta version are available in forum.

Check the forum for more info: http://www.eksimracing.com/forum

Hi Sim-Racers!

rFSLI-PRO Plugin for rFactor manage your SLI-PRO and SLI-M USB devices from Leo Bodnar.

SLI-PRO USB Device User manual.

SLI-PRO Configuration software for encoders.

rFSLIPro rFactor plugin
Latest pkg rFactorSLIPRO_094f.rar (updated 2010-05-17 - latest firmware required):

* if app won’t start see here

**Release note and beta version are available in forum.

Check the forum for more info: http://www.eksimracing.com/forum

In case, one of my app won’t start with this error:

“The application has failed to start because the application configuration is incorrect”

It’s because some lib version are missing on your windows installation,
Apply this patch below from Microsoft to fix it:

IMPORTANT:
The MS VS 2008 C++ has been updated and needed since version 0.93c3 of SLI-PRO manager:

Redistributable Pkg (9.0.21022.8 Update):
Latest version of software
Redistributable Pkg (9.0.30729.4148 Update):
For version v0.93c3 or higher

old Redistributable Pkg:
For version v0.93c3 or higher
For version v0.92 or higher
vcredist_x86sp1.exe
vcredist_x86.exe

Check the forum for more info: http://www.eksimracing.com/forum

Hi again!

SimbinSLI-M is out and support the new SLI-M board from Leo. The most important feature from F1Dash development has been implemented but not ALL due to lack of car info in the current API.
The minimal requirement:

1 button assigned to OSPT (default is button 1 )
1 button assigned to increase global brightness (default is button 2 )
1 button assigned to decrease global brightness (default is button 3 )

Read the documentation for installation and the config .ini file for more options.

SimbinSLI-M app
Latest pkg SimbinSLI-M_v3.1g2.rar* (updated 2009-11-19 - latest firmware required):
use SLI-Pro Manager see here

*full support on GTR2, GTR Evolution Steam and STCC/Race ON only

Check the forum for more info: http://www.eksimracing.com/forum

Enjoy!
EK

Hi, here a new app to test your great! SLI-M pcb.
Usage:
- connect your buttons to the board (if any)
- connect your external leds (if any)
- plug it to PC USB
- and launch my app

All leds and brightness will be tested and if you push a button during the test its number will be displayed on gear digit from button 1 to 8 and with the DOT highlighted from 9 to 16.

SLI-M Firmware v.16:
SLI-M Firmware 0_16.rar

SLI-M App Tester - latest pkg (updated 2009-08-28 - firmware >= v.16 required):
SLIMTestApp_v05.rar

Check the forum for more info: http://www.eksimracing.com/forum

All The Best,
EK

Hi all,

The LFSF1Dash app is finally out!
it manage as the rFactor plugin my wheel with the great board from my friend Leo Bodnard by parsing Outgauge packet from LFS Client.

Here a picture in LFS game:

Hi, Here the latest G25 Mod I’ve made! now the goal was to make my steering wheel prototype based on MOMO wheel and F1Dashboard pcb from Leo in carbon fiber… here some photos of the result after a lot of hard work…
Photos are respectively:
the Prototype in plastic, the glass fiber mold based on plastic proto, the “carbon sandwich” 3 layers of carbon fiber + 2 layers of glass fabric, then the carbon box sanded, clear coated, polished with electronics ready to be installed, the steering wheel in action…

Hi there!

The rFactor plugin and app that manage the F1Dashboard device from Leo Bodnar is almost ready. I waiting for Leo to implement the LCD Brightness feature to finalize them.

All plugin’s feature can be configured from the F1Dash Config App. you can for example assign each switch to a particular function, enter the std rpm table to highlight the leds at specific rpm, choose orange or blue led for shiftpoint or speedlimiter indicator, you can also edit, add and remove data from the shiftpoint table…etc.

Here some screenshots:

Welcome to my blog!
Those things here has been made for fun and for friends, so if it can boost your imagination and helps! it’s cool.

Enjoy!
EK