Attention, individual brigthness mode is not recommended, use GLOBAL brightness instead.

Individual brightness is available with SLI-PRO and SLI-M device

Go to Advanced Options panel to edit your setup and change these settings:

2014-05-05_184841

1) you CANNOT have global and individual brightness set together,
go to Advanced Options panel and set GLOBAL BRIGHTNESS to 0 (zero) to deactivate it

2) Each tag below define, with a comma delimited list, the brightness value of each led in range 1 to 8.
SHIFTLIGHTS RPM BRIGHTNESS (13 entries),
MARSHALL LED BRIGHTNESS (6 entries)
EXTERNAL LED BRIGHTNESS (5 entries)

3) Gear digit and the left/right digits panels are defined with 1 value from 1 to 8
CENTRAL GEAR BRIGHTNESS (1 entry),
RIGHT DISPLAY BRIGHTNESS (left panel, 1 entry)
LEFT DISPLAY BRIGHTNESS (right panel, 1 entry)

4) Optional: calibrate your device brightness by adjusting the maximum brightness value from 128 to 220 (default 140)
To calibrate your device, Choose the ‘Test Device…’ menu and check if the device do not reset by itself during the testing process, if it does, decrease the maximum value (personally I use 180 for SLIM and 150 for SLI-PRO, just so you know…).

** Your device should not FREEZE OR RESET by itself during the test **

Posted in: 6 Setup And Configuration