Getting Started with Thrustmaster And SLIMax Manager Pro


Getting Started with Thrustmaster and SLIMax Manager Pro

A Thrustmaster TS-PC Racer Ferrari 488 Challenge Edition and SLIMax Manager Pro is the perfect combo and good news the license is FREE!

Read this page to learn the basic steps to get started with the software SLIMax Manager Pro and your Thrustmaster steering wheel.

It is FREE for using SLIMax Manager Pro with your favorite wheel!
So Don’t wait! Download and install today the stable version or greater of SLIMax Manager Pro to enjoy your Thrustmaster hardware with more than 60 simulations/games.





List of current Thrustmaster Hardware supported*:

[NEW] Thrustmaster TS-PC Racer Ferrari 488 Challenge Edition (With Shift-light Interface)
Thrustmaster T-GT
Thrustmaster TS-XW Racer Sparco P310 Competition Mod
Thrustmaster TS-PC Racer
Thrustmaster T500 RS
Thrustmaster T300 Ferrari GTE
Thrustmaster T300 Ferrari Integral Alcantara Edition
Thrustmaster T300 RS
Thrustmaster T300 RS GT Edition
Thrustmaster T150 Force Feedback
Thrustmaster T150 Pro Force Feedback
Thrustmaster Rally GT Pro Force Feedback
Thrustmaster TX Racing Wheel Ferrari 458 Italia Edition
Thrustmaster TX Racing Wheel Leather Edition
Thrustmaster 458 Spider Racing Wheel
Thrustmaster TMX Force Feedback
Thrustmaster TMX PRO Force Feedback
Thrustmaster TH8A Add-On Shifter
Thrustmaster TH8 RS Shifter
Thrustmaster T3PA-PRO Add-On
Thrustmaster T3PA 3 Pedals Add-On

*Tested with latest Thrustmaster driver and firmware.

*Reminder: Version v3.4.6.4 or greater of SLIMax Manager Pro is required for a full support of all your hardware

Limitation (important, read carefully):
SLIMax Manager Pro will NOT START with only one Thrustmaster device connected WITHOUT any shiftlights interface or Virtual Dash EMUlator (VDASH-EMU) connected.

You need at least the Thrustmaster TS-PC Racer Ferrari 488 Challenge Edition or a Thrustmaster steering wheel WITH an additional display like the Virtual Racing Display Emulator VDASH-EMU which is the perfect companion for your steering wheel.

Getting Started


Watch the video above first and read carefully the basic steps to get started with your hardware

– install the latest Thrustmaster Driver (including the latest firmware) and check your hardware, it must be recognized by Windows
(if you have a Thrustmaster Ferrari 488 Challenge rim it is recommended to set it to “Advanced Mode“, see the game device properties)

– download and install the latest SLIMax Manager Pro (do not forget to Check for update to keep your install up to date).


CLICK TO DOWNLOAD SLIMax Manager Pro v3.4.6.4 or greater

– configure your simulation or games to send telemetry data (SLIMax Mgr Pro needs the car telemetry to work properly) and disable the Thrustmaster native support of the game (if needed). More info related to each game or simulation supported can be found in the Plugins Pages and in the FAQ below:


– do not forget to CAP THE FPS (limit the frame rate) in the game settings, Start with the default 60 fps value to give some CPU time to other apps in background or your game may eat all the resources of your PC and prevents SLIMax Manager Pro to work properly.

– run SLIMax Manager Pro

– run your favorite sim or game

It is strongly recommended to follow the basic steps above, you basically do not need anything else to get started,

– always use the default Thrustmaster setup and enjoy your sim racing rig with your favorite game or simulation first (SLIMax Manager Pro supports more than 60 game/simulation) and later start to customize your setup to suit your needs.




The Basic Setup Options:

Select the Basic Setup Options to change the Pit limiter, Shiftlights or Shiftpoints method, etc.


More info on Basic Setup Options are available in User Guide, HERE

Select a default setup:

The Thrustmaster default setups named thrustmaster_default.cfg. (see the screenshot below) are suitable for almost ALL simulations or games other than modern F1 cars (2015 season and beyond) so it’s preferable to select the corresponding F1 setups in this case. These setups ARE RECOMMENDED for beginners and to get started quickly.


More info on Basic Setup Options are available in User Guide, HERE

Advanced Setup Options

Advanced Setup Options:

Don’t start with Advanced Setup Options, you must first be familiar with SLIMax Manager Basic Setup Options and default setups, Also, it is recommended to read and understand the user guide and watching video tutorials (tips are available in support forum as well) before using the Advanced Setup Options.

The Thrustmaster TS-PC Racer Ferrari 488 Challenge Edition Shiftlights is managed by 2 modes.

15 led Mode (default) and the 13 led Mode, you can toggle from one to the other simply by selecting the corresponding setup. All setups contains a suffix mode15 led or mode13 led.


15 led (default) Mode dedicates ALL the 15 LED to the RPM Shiftlights

This is the default setup mode when you install SLIMax Mgr Pro using all the 15 LED of your steering wheel for the RPM Shiftlights.

The 13 led mode uses 2 Marshal led + 13 led for RPM Shifthlights.

The 2 Marshal can be dedicated to DRS or Flags (yellow, blue, etc.) or other warning events like Low Fuel, Damage, overheating, etc.. You can easily customize your configuration to blink the LED on such events using the Advanced Setup Options panel and be notified (obviously the simulation or game needs to send enough telemetry data to support these flags or warning info).

Marshal Led 1 is on Left and Marshal Led 2 is on right,
Double-click the corresponding LED function in
Advanced Setup Options > Settings > LED

and tick the led 1 or 2 (or both), then click the button OK, APPLY your change and SAVE your setup.

Exemple with low fuel warning on Marshal LED 2:

low fuel warning is triggered when your fuel tank contains 4 remaining laps (4 is the default value and can be changed)


Super Advanced Setup Options (EXPERT):

Don’t start with this Super Advanced Setup Options, you must first be familiar with SLIMax Manager Basic Setup Options and default setups,

The Wheel Angle or Degree Of Rotation (D.O.R.) can be set automatically

Check the video tutorials, doc and F.A.Q. to go further and learn how to customize your setup to suit your needs.

You can activate the Wheel Angle Database to let SLIMax Manager Pro changes your degree of rotation (DOR) of your steering wheel automatically. The Wheel Angle DB needs to identify your current car to apply the corresponding degree of rotation to your steering wheel but beware not all games or simulations necessarily provide this information. More info on Wheel Angle DB are available in the doc: HERE.


User Guide And Support

To go further:
The primary software support information is in on the getting started page and user guides (include video tutorials), see the link below:

User Guides


Register Your Support Account:

if you still need assistance after reading the documentation, F.A.Q. and watching the video tutorials, click the link below to to create your support account. The software support is available in English and French (Français) only. If you have a hardware issue contact your hardware supplier or the Thrustmaster support directly, we don’t do any hardware support.

Click the REGISTER button below to create your support account.
Before you can login and start using the software support forum, your registration info will be processed and approved by the licensing system. A notification will be sent to you by email to confirm your registration.



VDASH-EMU The Perfect “Second Screen” For Your Thrustmaster Steering Wheel:

Add a Virtual Racing Display Emulator for Android, Windows or Linux as a second screen to your
Thrustmaster hardware to increase your immersion and gaming experience.


VDASH-EMU Getting Started, User Guides and documentation(all you need to know to start with the emulator in English, French and Italian)

Thrustmaster Hardware are recommended by EKSIMRacing. All product names are trademarks or registered trademarks of their respective holders.